Видео

Hey Septimus. Great question. According Suzuki, the ECM, BCM and main wiring harness were all changed in 2022. To use Fish Hunter Drive you need these compatible items onboard. Since these items didn’t exist before 2022, Suzuki motors made prior to this time cannot be used with the Fish Hunter Drive.

Thanks for watching! The TZT12F, 16F, and 19F all have an HDMI output port which would allow you to connect another monitor and mirror the display.

The TZT22X and TZT24X can both display Side-Scan either from the DFF3D, or if you have a TZT10X, TZT13X, or TZT16X in the network with a CHIRP Side-Scan transducer connected to that unit. Thanks for watching!

Thanks for watching. The best thing to do is go to our Furuno Forum page, set up a free account and ask your question there. One of our technical support staff or dealers will be able to answer your question. Here's a link to the forum: furunousaforum.com/

Thanks for watching! The SCX-20 is a Satellite Compass, not a Radar. You need an NXT Radar for this feature.

Best thing to do is check with your local Furuno dealer to see if they have one to show you, or have any customers that would be willing to let you see it on their boat. If you have technical questions on the NXT Radar, check out the Furuno Forum, where you can get answers to your questions from Furuno dealers and technicians. Here's a link: furunousaforum.com/

Thanks for watching! This feature does not have a color blind mode, but that is a great suggestion. You can change the color of the targets when you are in regular Radar mode, which will help you see the targets. With TZtouchXL, there is a new feature called AI Avoidance, which has both an audio and visual alarm that warns you of a collision and even offers you a recommend course to navigate around the obstacle. Hope that answers your question. BTW, the new FCV600 & FCV800 Fish Finder do have a mode specifically made for people who are color blind, so the idea is definitely on our developers mind!

Thanks for watching and for your kind comments.

That is a DRS12ANXT/4 - a 4 foot open array.

@@FurunoMarineElectronics Thanks. I've considering the 3.5 vs 4 ft. on a similar size boat. Glad to see the 4 ft looks to be in proportion.

Hello Arnold and thanks for watching. Unfortunately we do not have technicians that monitor our RUclips channel. The best thing to do is go to the Furuno Forum at furunousaforum.com/, create a free account and ask your question in the TZtouch section. There a either a Furuno technician or dealer will be able to answer this question for you. I hope this helps!

thankyou sir

Hi John! Our dealers are taking orders now for the 22” and 24” units, with deliveries starting in the next few weeks. We will start taking orders for the 10”, 13”, and 16” in the next several weeks, with deliveries expected this spring. For availability updates, please check with your local dealer, as we will keep them updated as products become available.

@wattocraig Thanks for watching! Yes, it does adjust for the tide change.

Hello @donsolomon8501, thanks for watching! The side-scan feature not originally planned in the development of TZtouch3 and was a free software added feature that came a year after the TZT3 came out, which is why it only has one transducer connector. Not ideal as you stated, but definitely a fantastic free upgrade to an existing system.

@@FurunoMarineElectronics yeh 100%. Cool

Thanks for watching, glad you enjoyed the episode!

Hello, unfortunately we do not have technicians that monitor our RUclips page. The best thing for you to do is to contact your nearest Furuno distributor and they will be able to help you. You can locate your a Furuno distributor by clicking here: www.furuno.com/en/support/distributors/marine/

Thank you for watching! Yes, you can set the unit up to read meters.

Hello and thanks for watching. Unfortunately we do not have techs monitoring our social media, but you can ask your question on our Furuno Forum to see if you can get your answers there. Here is a link to the forum: furunoforum.com/

Rafeek- Great question and great setup you have. This could conceivably work the same way on any outboard just as it does with Suzuki, but unfortunately Mercury chose to partner specifically with Simrad autopilots. The main functionality behind the operation of Fish Hunter Drive is the communication between the Furuno NavPilot 300 autopilot and the Suzuki outboard motors. Since Fish Hunter Drive requires a Furuno NavPilot 300 autopilot to function, there is no way we can make it work with Mercury outboards because Mercury has chosen to lock down control of their outboards to work with only Simrad autopilots.

@@timmoore1020 thats very good piece of knowledge. I had a look into all the manuals of Furuno and Mercury but didnt find any info regarding intergration. We have got a vessel view 9inch screen which is basically a simrad go9 works well with mercury autopilot. In the Furuno screen the RPM and all parameters appear except autopilot feature

The transducer in the middle of the table is the 165T-50/200-SS260 Combination transducer, which will drive your TZT16F's built-in 50/200kW Fish Finder as well as the DFF3D Multibeam Sonar: www.furunousa.com/en/products/165t-50--200-ss260

Hello and thanks for watching. You can find the manual here and on page 1-1 it shows you how to adjust the screen brilliance. www.furunousa.com/-/media/sites/furuno/document_library/documents/manuals/public_manuals/gp1871f_gp1971f_operators_manual.pdf. This can be done by simply pressing the power key several times or using the slider bar.

Thank you very much for the information on how to increase the screen brightness. Now could you help me how to set the water temperature to appear in the fishfinder option?

@@allan-oktane-tedesco6824 For questions like these that are more technical in nature, please visit the Furuno Forum, create a free account, and ask you question there. It will be answered by Furuno dealers, experts, and moderators. Here's a link to the forum: furunousaforum.com/

Hello and thanks for watching. Unfortunately we do not have techs on our RUclips channel to answer technical questions. For a question like this, please go to the Furuno Forum, register for a free account and ask you question in the GPS Chart Plotters section. You can find the forum here: furunousaforum.com/. Thanks again for watching.

Good day and thanks for the question. You are indeed missing something, so your feelings are correct. You'll need to add a Suzuki Y cable with a part number of 36667-96L40. This Y cable will allow you to disconnect the current wire from your Port SMG4. You'll then plug this Y cable into the port on the SMG4. Once you do that, you now have two open ports in the Y cable. Plug the original SMG4 cable into one side and the gateway into the other side. To answer your second question, you do only need 1 Suzuki gateway for up to 6 motors, but it has to be a specific gateway. Please ensure the gateway you are using for FishHunter Drive has a part number of 34923-96L11, L12, or L13. If you do have this gateway, you'll be good to go once you add the Y cable and do your system setup. If you need more information, here are two great resources to use. www.furunousa.com/-/media/sites/furuno/document_library/technical_info/interfacing_and_installation/interfacing_and_installation/suzuki_fishhunter_setup_supplement.pdf www.furunousa.com/-/media/sites/furuno/document_library/technical_info/interfacing_and_installation/interfacing_and_installation/navpilot_fishhunter_drive.pdf Please let us know how everything turns out for you. You are going to love the FishHunter Drive.

Thanks for watching! Stay tuned as we are constantly working on new videos.

Thank you, we agree!😉 Thanks for watching!

Thanks for watching! It isn't so much that you need a Suzuki screen permanently to use Fish Hunter Drive, but you do need one to set Fish Hunter Drive up. Unfortunately, Suzuki didn't allow for the system to be setup through a Suzuki Smart Gauge (SMG4), so to get your system setup you will need some additional components. Once your system is setup, your TZT3's will handle everything you want to do. I am not sure if you have tried reaching out to them yet, or where in Australia you are located, but I speak to the guys at JN Taylor (Taylor Marine) in Australia fairly regularly and I know they have already done a number of Fish Funder Drive installs for customers. They have locations in Henderson, Mt. Gambier, Adelaide, and Port Lincoln if that helps you. For now, here is some reading material. These documents show you what it takes to get Fish Hunter Drive set up and running. It will look like a lot of information, but truth be told, it's not really that hard once you have everything you need on hand. We just went through great pains to make the attached documents as thorough as possible. If you can't get everything setup, please let us know and we'll help you anyway we can. Maybe you can talk my US bosses into flying me to Australia. 😂 I've always want to visit. www.furunousa.com/-/media/sites/furuno/document_library/technical_info/interfacing_and_installation/interfacing_and_installation/navpilot_fishhunter_drive.pdf www.furunousa.com/-/media/sites/furuno/document_library/technical_info/interfacing_and_installation/interfacing_and_installation/suzuki_fishhunter_setup_supplement.pdf

Thanks so much mate! That’s really helpful!

Hello and thanks for watching. We apologize if your TEU001B broke after one year, the warranty period is 2 years, so that is still under warranty. Please contact our USA HQ at 360-834-9300 and ask for warranty repair.

Hi Gary, thanks for the reply and your continued patronage! Check out this playlist of short TZtouch3 instructional videos, where we go over the basics for using your TZtouch3 MFDs: ruclips.net/p/PLNAnyrS0eNSyQ_zJFH7vXhpgHW3DWCf3l If you have suggestions for more videos like these for a specific feature or function, please leave us a comment - thanks again, Gary!

You can also check out this playlist as well: ruclips.net/p/PLNAnyrS0eNSzoiYxtAqJ-SGapLt7O2P5X